KSetiSaver

Screensavers

Source (link to git-repo or to original if based on someone elses unmodified work): Add the source-code for this project on opencode.net

1
5 .0
Description:

Hi!

I developed this KDE screensaver which monitors a running Linux CLI client.

READ the README file very careful, and check the KSetiSaver homepage if you run into problems***


--------------------------------------
If you have questions feel free to mail: [email protected]
---------------------------------------
Last changelog:

17 years ago

A small bugfix release. This time all the fame should go to Sebastian Muszynski ([email protected]) because he has done all fixes.

KSetiSaver
- is now able to handle client & data in different directories correctly (this was quite messed up)
- the error messages are more descriptive in some cases

alyn3d

14 years ago

Well, the link-s broken... :(

Report

fetoor

12 years ago

You can find it here: http://b1project.com/ksetisaver.html

but I have also problem with compiling it.

Report

piotao_double

15 years ago

On Debian 3.+ I can't compile this. First there were some errors with QT (installing libqt3-mt-dev helps to pass some configure tests), but I got the following error:

c++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include/kde -I/usr/share/qt3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -O2 -fno-exceptions -fno-check-new -c configdialogR2.cpp
configdialogR2.cpp: In constructor `configDialogR2::configDialogR2(QWidget*,
const char*, bool, unsigned int)':
configdialogR2.cpp:301: error: `Spacer1' undeclared (first use this function)
configdialogR2.cpp:301: error: (Each undeclared identifier is reported only
once for each function it appears in.)
configdialogR2.cpp:384: error: `Spacer4' undeclared (first use this function)
configdialogR2.cpp:390: error: `Spacer5' undeclared (first use this function)
configdialogR2.cpp:570: error: `Spacer2' undeclared (first use this function)
configdialogR2.cpp:605: error: `Spacer3' undeclared (first use this function)
make[3]: *** [configdialogR2.o] B³±d 1
make[3]: Leaving directory `/home/piotao/ksetisaver-0.3.4/ksetisaver'
make[2]: *** [all-recursive] B³±d 1
make[2]: Leaving directory `/home/piotao/ksetisaver-0.3.4/ksetisaver'
make[1]: *** [all-recursive] B³±d 1
make[1]: Leaving directory `/home/piotao/ksetisaver-0.3.4'
make: *** [all-recursive-am] B³±d 2

Report

AMDUser

15 years ago

Yes, I have the same problem.

And another Question... Does it work with BOINC, too?

Alex

Report

swasher

14 years ago

and i am ((
can't conpile under FC4

Report

wastl

15 years ago

If u want KSetiSaver in FreeBSD:

There is a port in the FreeBSD Ports system! Just use that one.
Also there is a port of the linux setiathome client there!

Using both of them KSetiSaver runs fine on my BSD Box. If I compile it from the original sources it don't..

cheers
Wastl

Report

botman

16 years ago

hi, I have a problem when runing ./configure. after it says checking for X... it gives me the error: can't find X includes. What's it looking for? many thanks for helping a newbie.

Report

xeon

16 years ago

Finally i got it!
A very good and cool work, i especially like that it shows me lots of thing that seti does and that in the winzozz client there arent.
The funny thing is that it took me 2 days to compile and install it...boring bug, i need to do a 'make distclean' after ./configure, or else make report an error...(compiling from .tar.gz 0.3.4)

Report

zsoltb

17 years ago

with KsetiSaver.desktop on the right place ;-)

http://members.chello.at/zsolt.berczes/software/ksetisaver-0.3.3-1mdk.i586.rpm
http://members.chello.at/zsolt.berczes/software/ksetisaver-0.3.3-1mdk.src.rpm

Report

BOSSoNe

17 years ago

sorry but there's a little misfunction in your packages.
you have'nt correctly set some params of the rpm like rpm cat.
So you can download officials GPG signed packages on my site:
http://b1project.com

Report

jsheedy

17 years ago

I am not sure your rpms are correctly setup either. When I reboot the system the screensave is gone. Does some type of enter need to be in /usr/lib/menu?
J

Report

BOSSoNe

17 years ago

is out!
you can download the new version with KDE3 bugfixe on Sebastian's site and MDK9.0 rpms on my site.

Report

geekboy2000

17 years ago

I just grabbed 3.2, but it still complains on startup that it can't find the data in /usr/bin. The user data, etc is there. I'm running RH 8/KDE 3.0.5-1. Any suggestions? Thanks!

Report

BOSSoNe

17 years ago

there is 2 ways to set the data directory.
first you have data and seti client in the same dir, so you have to check the "same data and client dir" option and to set the correct path of the client eg:
/usr/local/seti/
else, don't check the option and set the two corrects paths.

Report

geekboy2000

17 years ago

I do have both the data and bin in the same directory (/usr/bin), and have the box checked indicating that they are in the same directory/path, but I still get that error. I see an earlier tip about deleting the rc file for ksetisaver and starting over. I'll give that a try. Thanks.

Report

geekboy2000

17 years ago

It (ksetisaver) is indicating that it can't access state.sah. I just confirmed the file is in the /usr/bin directory along with setiathome and ksetisaver, so I'm stumped once again. I did delete the ksetisaverrc file, and configured it again, but still, the same problem.

Report

geekboy2000

17 years ago

My profound apologies if this is a "RTFM" issue, but it was as simple as me not using the trailing "/" at the end of the paths! Man thanks for a great app, it's working!! :)

Report

jsheedy

18 years ago

I cant get it to run under Mandrake 9.0. Seti works fine at a command prompt, but kseti complains about not being able to open file.

Here is what is says.
Couldn't open state.sah in directory /files/multimedia/seti
RETURNDED 0

The file is in the dir and has rw perms for my current user.

Not sure. Thanks for any help

Report

holywen

17 years ago

you should change setiparse.cpp.
the following is diffrences between the old (setiparse.cpp) and the new (setiparse1.cpp).
[email protected]:ksetisaver# diff setiparse.cpp setiparse1.cpp
70c70
ifstream in_st;
72,73c72,73
in_st.open(currFile.c_str());
> if (!in_st)
78,79c78,79

> while (in_st)
81c81
getline(in_st,currLine); //C++ I/O sucks...
84c84
in_st.close();
86a87
> ifstream in_ui;
88,89c89,91
std::cout in_ui.open(currFile.c_str());
> if (!in_ui)
95c97
while (in_ui)
97c99
getline(in_ui,currLine); //C++ I/O sucks...
100c102
in_ui.close();
102a105
> ifstream in_wu;
104,105c107,108
in_wu.open(currFile.c_str());
> if (!in_wu)
111c114
while (in_wu)
113c116
getline(in_wu,currLine); //C++ I/O sucks...
116c119
in_wu.close();

Report

geekboy2000

17 years ago

I modified setiparse, got it to compile fine, but still, I get the error with respect to the .sah file. Setiathome works fine from the console, but KSetiSaver can't seem to find the .sah files. I'm running KDE 3.0.5-1 w/Redhat 8.0

Report

holywen

17 years ago

you should change setiparse.cpp.
the following is diffrences between the old (setiparse.cpp) and the new (setiparse1.cpp).
[email protected]:ksetisaver# diff setiparse.cpp setiparse1.cpp
70c70
ifstream in_st;
72,73c72,73
in_st.open(currFile.c_str());
> if (!in_st)
78,79c78,79

> while (in_st)
81c81
getline(in_st,currLine); //C++ I/O sucks...
84c84
in_st.close();
86a87
> ifstream in_ui;
88,89c89,91
std::cout in_ui.open(currFile.c_str());
> if (!in_ui)
95c97
while (in_ui)
97c99
getline(in_ui,currLine); //C++ I/O sucks...
100c102
in_ui.close();
102a105
> ifstream in_wu;
104,105c107,108
in_wu.open(currFile.c_str());
> if (!in_wu)
111c114
while (in_wu)
113c116
getline(in_wu,currLine); //C++ I/O sucks...
116c119
in_wu.close();

Report

holywen

17 years ago

I downloaded the latest command line
client ,and it comes with a xsetiathome,when I run the setiathome with a -graphics parameter,the xsetiathome works just fine.
but the screensaver just thow out a "cann't locate /opt/setiathome/state.sah ".and that file is exactly at the right place and the permission is rw for everyone(I changed to this after I saw this error ),but,not work at all.

Report

Eudial

18 years ago

;-;

it's a 404 error!

Report

SuGa

18 years ago

great work :)
a screensaver for [email protected] would be great too :)

Report

Elassus

18 years ago

running SuSE with KDE 3.02, all from approved RPM packages. installed all the files (ran make and make install, without incident) to a subdirectory of ~, and then softlinked the .desktop file to my screensavers directory. it shows up on my list of screensavers, but i can't get to any settings, and it won't run at all.

any ideas? want any .log files? did i screw something up?

(wish SuSE would make an RPM, cause i can't)

Report

17 years ago

A small bugfix release. This time all the fame should go to Sebastian Muszynski ([email protected]) because he has done all fixes.

KSetiSaver
- is now able to handle client & data in different directories correctly (this was quite messed up)
- the error messages are more descriptive in some cases

12345678910
product-maker Base: 4 x 5.0 Ratings
Be the first to comment
Avalonemyst
Aug 19 2018
File (click to download) Version Description Downloads Date Filesize DL OCS-Install MD5SUM
*Needs pling-store or ocs-url to install things
Pling
0 Affiliates
Details
license
version
0.3.4
updated Jun 02 2003
added Mar 01 2002
downloads 24h
0
mediaviews 24h 0
pageviews 24h 0