audiokonverter Original

Dolphin Service Menus flv mp3 mp4 ogg

Source (link to git-repo or to original if based on someone elses unmodified work): Add the source-code for this project on opencode.net

14
7 .8
Description:

audiokonverter is a service menu (and also a commandline utility) to easily convert from MP3, OGG, AMR, AAC, M4A, FLAC, WMA, RealAudio, Musepack, Wavpack, WAV and movies to MP3, OGG, M4A, WAV and FLAC in Konqueror by right-clicking on them. It needs ffmpeg/avconv, oggenc, oggdec, faac, faad, flac, mplayer and lame to work. id3lib is optional for full functionality. Also optional are vorbis-tools and metaflac for handling other metadata. See README how/where to get that software.
Be sure about needed software when installing prebuilt packages!

Please vote for "good" if you like the program. There are many downloads with each release, but only a few votes.
Last changelog:

6.0.0 10 months ago

Added support for KDE5

C

labrum

13 years ago

Try faac --help. Mine is FAAC 1.24 and shows these options, maybe yours is outdated or compiled without support for these options. Hard for me to handle incomplete or outdated versions.

Report

chandraiitk

13 years ago

"$ rpm -q faac" gives "faac-1.24-3.fc4.rf".i.e. new version.
However, "$ faac --long-help" doesnt show oprions like "--artist" etc. I think I need to compile 'faac' from source with these options enabled. Anyway, following r the output of my "$ faac --help":
Freeware Advanced Audio Coder
FAAC 1.24

Usage: faac [options] infiles ...
Options:
-q Set quantizer quality.
-b Set average bitrate to x kbps. (ABR, lower quality mode)
-c Set the bandwidth in Hz. (default=automatic)
-o X Set output file to X (only for one input file)
-r Use RAW AAC output file.
-P Raw PCM input mode (default 44100Hz 16bit stereo).
-R Raw PCM input rate.
-B Raw PCM input sample size (8, 16 (default), 24 or 32bits).
-C Raw PCM input channels.
-X Raw PCM swap input bytes
-I Input channel config, default is 3,4 (Center third, LF fourth)

MP4 specific options:
MP4 support unavailable.

Documentation:
--license Show the FAAC license.
--help Show this abbreviated help.
--long-help Show complete help.

More tips can be found in the audiocoding.com Knowledge Base at


Thank you by the way for your help and this app. I hope u keep this work up.

good luck.

Report

google01103

14 years ago

could you add flv as source so they can be converted to avi or so audio can be extracted from them

thanks,

Report

C

labrum

14 years ago

Sure I could, if you tell me any free software that can handle flash video.

Report

bash2006

13 years ago

ffmpeg does

Report

google01103

14 years ago

this is what I use:
ffmpeg -i input.flv output.avi

to strip audio
ffmpeg -i input.flv output.flac

of course there's lot's of available options in ffmpeg but the above works

the flv's I get from youtube.com

thanks,

Report

C

labrum

13 years ago

Does MPlayer support flv files? If not, it is too much work for me, sorry.

Report

watzke

13 years ago

Yes.

Report

C

labrum

13 years ago

FLV audio extraction works since 5.4.5.

Report

C

labrum

13 years ago

OK, I'll try to add audio extraction. Converting to AVI is not the task of audiokonverter (and never will be).

Report

gohanz

14 years ago

A SlackWare TGz package with SlackBuild Script is Ready to DownLoad!!!

http://www.slacky.it/


http://www.slacky.it/index.php?option=com_remository&Itemid=29&func=fileinfo&id=1304

Report

BorgQueen

14 years ago

Thanks, these are very useful apps.

Report

madmonk

14 years ago

Kubuntu 6.06, kde 3.5.3. I have some problems installing the required mppdec,apetag,id3tag,id3cp,id3info...I downloaded the source code of both mppdec and apetag but it seems like in both cases the "configure" file is missing, or else they need a strange way to compile or install which is not specified in the README..for the id3stuff they're not in my repos...but i guess i have something similar...donnotknow more :( Help needed... I'd really like to try the full options of this nice utility!

Report

bitcrazy

14 years ago

Hi,
there's no need to compile mppdec and mppenc. After unzipping the archives, you have to set the binaries (mppenc and mppdec) executable, move them into your $PATH, et voila.
Unpack apetag, change into the resulting library and type make. Move the resulting apetag binary somewhere in your $PATH and you're done

Greetings

m0nk

Report

aarde

14 years ago

I use audiokonv on Suse9.1 and installed is yesterday on 10.1
Works like a charm!
Thanks.
Maybey of interest to anyone using kde above 3.2.x

Maarten

Report

C

labrum

14 years ago

KDE 3.2.x is minimum, not a recommendation in any way. Also works with KDE 3.5 and will probably work with KDE 4 as well.

Report

sadarax

14 years ago

This is a very handy bit of code work. Thanks a lot. May I make a request to add Musepack encoding as an option? I'd really love to have that....

Report

C

labrum

14 years ago

Please try Perl Audio Converter for an overloaded service menu. I want to keep mine limited to the main formats.

Report

prankxd

14 years ago

Hi!
At last I decided to compile faac and I've got MP4 support but when I tried to convert a mp3 file to m4a for iPod I obtain this message:

kdialog: Falta '[startDir]'.
kdialog: Use --help para obtener una lista de las opciones disponibles en la línea de comandos.
[[email protected] ~]$ audioconvert -t a /home/gerardo/dj.mp3
kdialog: Falta '[startDir]'.
kdialog: Use --help para obtener una lista de las opciones disponibles en la línea de comandos.

# Now converting: /home/user1/dj.mp3

ID3v2 found. Be aware that the ID3 tag is currently lost when transcoding.
input: /home/gerardo/dj.mp3 (44.1 kHz, 2 channels, MPEG-1 Layer III)
output: (16 bit, Microsoft WAVE)
skipping initial 1105 samples (encoder+decoder delay)
Frame# 6/12735 128 kbps L R Freeware Advanced Audio Coder
FAAC 1.24

Frame# 17/12735 128 kbps L R Couldn't create output file //dj.aac

I think it should be a path problem :S

Thanks for your help ;)

Report

C

labrum

14 years ago

Definitely a path problem. When I do this, I get a dialog to choose the output path. Which one do you choose, or don't you get the dialog? Which KDE version do you have? Try to edit .kde/share/config/kwerc encdir=/home/user1 decdir=/home/user1 Right now I am pretty clueless about "startDir". Looks like kdialog is being started in a dir which it doesn't like.

Report

prankxd

14 years ago

It woks!
My encdir was empty. It begins to work when I put the path in it.

Thanks, I really love this app.
Nice job!

Report

prankxd

14 years ago

I think my faac encoder not support MP4 :S

faac --help command:

Freeware Advanced Audio Coder
FAAC 1.24.1 (Sep 5 2005) UNSTABLE

Usage: faac [options] infiles ...
Options:
-q Set quantizer quality.
-b Set average bitrate to x kbps. (ABR, lower quality mode)
-c Set the bandwidth in Hz. (default=automatic)
-o X Set output file to X (only for one input file)
-r Use RAW AAC output file.
-P Raw PCM input mode (default 44100Hz 16bit stereo).
-R Raw PCM input rate.
-B Raw PCM input sample size (8, 16 (default), 24 or 32bits).
-C Raw PCM input channels.
-X Raw PCM swap input bytes
-I Input channel config, default is 3,4 (Center third, LF fourth)

MP4 specific options:
MP4 support unavailable.

Documentation:
--license Show the FAAC license.
--help Show this abbreviated help.
--long-help Show complete help.

More tips can be found in the audiocoding.com Knowledge Base at



I installed it from plf mandriva 2006 repository.

I'm looking for a solution...

Report

C

labrum

14 years ago

I guess you have to ask someone in a Mandriva forum if you do not want to compile some packages from source.

Report

prankxd

14 years ago

I'm using mandriva 2006 and I get this error when I make an aac from a Mp3 file:

Getting metadata from MP3
Freeware Advanced Audio Coder
FAAC 1.24.1 (Sep 5 2005) UNSTABLE

faac: invalid option -- w
faac: unrecognized option `--artist'
faac: unrecognized option `--title'
faac: unrecognized option `--album'
faac: unrecognized option `--year'
faac: unrecognized option `--comment'
faac: unrecognized option `--genre'
faac: unrecognized option `--track'
Usage: faac [options] [-o outfile] infiles ...

and/or can be "-", which means stdin/stdout.

See also:
"faac --help" for short help on using FAAC
"faac --long-help" for a description of all options for FAAC.
"faac --license" for the license terms for FAAC.

ID3v2 found. Be aware that the ID3 tag is currently lost when transcoding.
input: /home/xxx/Música/file.MP3
(44.1 kHz, 2 channels, MPEG-1 Layer III)
output: (16 bit, Microsoft WAVE)
skipping initial 1105 samples (encoder+decoder delay)
Frame# 2/13666 128 kbps LMSR


The file is not created :S
¿Can anybody help me?

Report

C

labrum

14 years ago

Please post faac --help here. Mine is: Freeware Advanced Audio Coder FAAC 1.24 Usage: faac [options] infiles ... Options: -q Set quantizer quality. -b Set average bitrate to x kbps. (ABR, lower quality mode) -c Set the bandwidth in Hz. (default=automatic) -o X Set output file to X (only for one input file) -r Use RAW AAC output file. -P Raw PCM input mode (default 44100Hz 16bit stereo). -R Raw PCM input rate. -B Raw PCM input sample size (8, 16 (default), 24 or 32bits). -C Raw PCM input channels. -X Raw PCM swap input bytes -I Input channel config, default is 3,4 (Center third, LF fourth) MP4 specific options: -w Wrap AAC data in MP4 container. (default for *.mp4 and *.m4a) --artist X Set artist to X --writer X Set writer to X --title X Set title to X --genre X Set genre to X --album X Set album to X --compilation Set compilation --track X Set track to X (number/total) --disc X Set disc to X (number/total) --year X Set year to X --cover-art X Read cover art from file X --comment X Set comment to X and so on. Did they change the syntax so much? Is your file OK? What filename is it?

Report

6.0.0 10 months ago

Added support for KDE5

Fix 3 years ago

fixed paths for KDE4

5 years ago

fix for ogg decoding

12345678910
113
product-maker xeno-idaltu Jan 03 2018 9 excellent
product-maker audoban Oct 06 2014 9 excellent
product-maker darthroe Oct 02 2014 9 excellent
product-maker sefran Oct 02 2014 9 excellent
product-maker xrooters Jul 13 2013 9 excellent
product-maker SeaJey Nov 16 2011 9 excellent
product-maker alpvonkri Jul 06 2011 9 excellent
product-maker jmunin May 21 2011 9 excellent
product-maker bastoshan Mar 15 2011 9 excellent
product-maker jorssoftware Feb 09 2011 9 excellent
product-maker Droopy159 Nov 25 2010 9 excellent
product-maker olegue Nov 22 2010 9 excellent
product-maker vitoubien Nov 21 2010 3 bad
product-maker amigib Nov 15 2010 9 excellent
product-maker Base: 4 x 5.0 Ratings
Be the first to comment
airwolf776
Apr 17 2020
lofiatunes
Dec 04 2019
alpvonkri
Nov 02 2018
audoban
Oct 06 2014
dharman
Apr 18 2014
janet
Mar 22 2014
xrooters
Jul 13 2013
SeaJey
Nov 16 2011
jmunin
May 21 2011
amigib
Nov 15 2010
quadra
Jul 06 2010
Znurre
Apr 11 2010
sommerluk
Apr 04 2010
choxos
Jul 07 2009
File (click to download) Version Description Downloads Date Filesize DL OCS-Install MD5SUM
*Needs pling-store or ocs-url to install things
Pling
0 Affiliates
Details
license
version
6.0.0
updated Oct 31 2019
added May 13 2004
downloads 24h
2
mediaviews 24h 0
pageviews 24h 33
System Tags addon